Insulation Piercing Connector (IPC) • IPC’s provide a simple, quick and cost effective connection.
There is no cable stripping required. • Special connecting blade apply to joint of cu(al) and cu(al) or
cu and al. • Special moment nut let the piercing pressure constant,keep good
electric connection and make no damage to cable. • Stainless bolt and nut and the other components let the clamp has
excellent mechanic and resistance to corrosion performance • Are surface design ,apply to connection with the same (different)
diameter,wide connection scope(0.75mm2-400mm2/td> • Small electric connecting resistance, resistant to high impulse
current. the change of resistance is very small. All the parameters
are very good to the requirement that described by whvri. Feature: • Resin effusion technology and self-seam structure let connector
has waterproof,high insulation strength feature.It can resistant to
4kv 1min in water. • Adopted special feature rubber as waterproof and insulation
material.It let the clamp can be safely used in -50---150 degree
C.The special rubber will not failure in 50 years.The end cover has
bolt frame.It can adapt to all kinds of cables.(Attention:only the
new rubber can be colored to colorful rubber.The re-used rubber can
not be colored.) • The shuck is made by imported excellent glasses enhanced
plastic.So,it has excellent mechanic feature and environmental
aging performance. • All the components were desgined by CAD and manufactured by
CAM.They all have same performances. Notes : Insulation Piercing Connectors can be removed but not re-used.